We could do this in the pre - up script for br0 , except that , on my particular card , if you set the essid and wep key too closely together , the card hangs for a while 我们可以在用于br0的pre - up脚本中这样做,只是对于这块特定的卡,如果将essid和wep密钥设置得太过于接近,那么卡就会挂起一会儿。
This procedure assumes the interfaces aren t being configured by any other mechanism , so we want to comment out other lines referring to wlan0 or eth0 , although we do use etc pcmcia hostap cs . conf to set the essid base station name for our wireless card 这一过程假定这些接口不是由任何其它机制来配置的,因此我们希望注释掉与wlan0或eth0有关的其它行,但我们确实使用了/ etc / pcmcia / hostap _ cs . conf来设置无线网卡的essid (基站名称) 。